Pantallas LCD 16×2

En la siguiente imagen podemos apreciar la pantalla LCD 16 x 2 (16 Caracteres, 2 Lìneas)

Si deseas comprar este artìculo, click Aquì.

LCD 16X2
LCD 16×2 Shield by HeTPro

Pantalla LCD 16×2

LCD 20×4

En la siguiente imagen podemos apreciar la pantalla LCD 16×2 (16 Caracteres, 2 Lìneas)

Si deseas comprar este artìculo, click Aquí.

LCD
Pantalla LCD 20×4 TC2004A-01

 Descargar código AQUI: HelloWorld

Código de Arduino:

[code language=»cpp»]
<pre>/*
LiquidCrystal Library – Hello World

Demonstrates the use a 16×2 LCD display. The LiquidCrystal
library works with all LCD displays that are compatible with the
Hitachi HD44780 driver. There are many of them out there, and you
can usually tell them by the 16-pin interface.

This sketch prints «Hello World!» to the LCD
and shows the time.

The circuit:
* LCD RS pin to digital pin 8
* LCD Enable pin to digital pin 9
* LCD D4 pin to digital pin 4
* LCD D5 pin to digital pin 5
* LCD D6 pin to digital pin 6
* LCD D7 pin to digital pin 7
* LCD R/W pin to ground
* 10K resistor:
* ends to +5V and ground
* wiper to LCD VO pin (pin 3)

Library originally added 18 Apr 2008
by David A. Mellis
library modified 5 Jul 2009
by Limor Fried (http://www.ladyada.net)
example added 9 Jul 2009
by Tom Igoe
modified 22 Nov 2010
by Tom Igoe

This example code is in the public domain.

http://www.arduino.cc/en/Tutorial/LiquidCrystal
*/

// include the library code:
#include <LiquidCrystal.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(8, 9, 4, 5, 6, 7);

void setup() {
// set up the LCD’s number of columns and rows:
lcd.begin(16, 2);
// Print a message to the LCD.
lcd.print(«HeTPro»);
}

void loop() {
// set the cursor to column 0, line 1
// (note: line 1 is the second row, since counting begins with 0):
lcd.setCursor(0, 1);
// print the number of seconds since reset:
lcd.print(millis()/1000);
}

[/code]

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *