WS2812

NeoPixel Stick 8 x WS2812 LED RGB


 

$186.00

223 puntos
9 puntos
NEOP0812-GA_44-0
4 Artículo(s)
+

Descuentos de mayoreo:

Cantidad  5+ 
Precio  $175.00 
  • DESCRIPTION

    Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you're ready to rock.

    The LEDs are 'chainable' by connecting the output of one stick into the input of another - see the photo above. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.

    Comes as a single stick with 8 individually addressable RGB LEDs assembled and tested.

    Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)





    NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers (6:15)

  • TECHNICAL DETAILS

    WS2812 Datasheet

    • Dimensions: 51.10mm / 2" x 10.22mm / 0.4" x 3.19mm / 0.12"
    • Weight: 2.57g
    • We currently ship this product with the WS2812B 4-pin chip LED installed. Previous versions may have come with the WS2812S 6-pin LED. Both B and S LEDs can be chained together and are compatible with the NeoPixel Libary. The 'B chip type adds additional polarity protection and is the same brightness as the 'S type.
    • LEARN

      Experimenting with NeverWet + Electronics
      Circuits under water and more!
      Adafruit NeoPixel Überguide
      Everything you always wanted to know about Adafruit NeoPixels but were afraid to ask

    Nuestros clientes también compraron