DESCRIPCIÓN
Este cargador de lipo es tan practico pequeño y facil de usar , se puede de montar en cualquier proyecto.Solo conectandolo a traves de cualquier cable MiniUDBa un puerto USB y a una bateria recargable de 3.7V/de litio 4.2V o iones de litio en el JST enchfe en el otro extremo.
Tiene dos LEDs , uno rojo y uno verde.Durante la carga el LED rojo se enciende.Cuando la bateria esta completamente cargada y lista para uso, el LED verde se enciende.
-
Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the front, for when you'll only be charging batteries with 500mAh size or larger.
For use with Adafruit LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity or pinout.- Comes assembled and tested with a free bonus JST cable!
- 5V input via Mini-B USB connector
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
Batteries not included.
-
TECHNICAL DETAILS
Details:
- Dimensions: 24mm x 19mm x 2mm / 0.9" x 0.7" x 0.08"
- Height w/ JST: 7mm / 0.3"
- Weight: 2.5g
- MCP73831 Datasheet
- NO INCLUYE LIPO
-
LEARN
MAY WE ALSO SUGGEST...