MAXQ­P2000

Esta es una tarjeta de evaluación con procesador MAX2000-Rax. Este procesador tiene como características: microcontrolador de 16 bits con 64 KB Flash, 2 KB RAM, 3 temporizadores de 16 bits, driver para LCD. Producto de la familia de Olimex.

ESPECIFICACIONES

• Integrado con 2 cpnectores RS232.
  
• Integrado con conector JTAG.
  
• Conector de puerto SPI.
  
• Buzzer integrado.
  
• Boton de reset.
  
• Conector de batería Li-Po 3v.
  
• LEDs de estado.
• Conector de jack para alimentación.
  
• Integrado con dos reguladores de voltaje.
   
  

CARACTERISTICAS

• Dimensiones: 100x80 mm.
  
• Peso: 61g.
  
• Marca: Olimex.
  
• Cantidad: 1 pieza.
   
  

ENLACES DE INTERES

• Página del fabricante: Olimex.

MAS INFORMACIÓN

• MCU: MAX2000-RAX up to 20 Mhz( single clock per instruction i.e. up to 20MIPS), low power 190 uA @ 8Mhz, power supply 1.8-2.5V, 16 bit microcontroller with 64 KB Flash (10K re-programming cycles), 2KB RAM, 3x 16bit Timers, 2x UART, 1x SPI, 1-wire, build-in driver for 132 segment LCD
• JTAG connector
• 20 Mhz (on socket) and 32 768 Hz oscillator crystal
• 2x RS232 connectors, one can be used for code bootloader
• 1x SPI port on connector
• 1-wire connector
• Buzzer
• Li-io 3V battery connector on board (no RS232 power supply when using this battery)
• Two buttons on ports with interrupts
• RESET button
• Status LED
• Power supply LED
• Two on-board power supply voltage regulators supplying +1.8-2.2-2.5V to core and +3.3V to GPIOs
• PWR_JTAG allow board to be power supplied by the JTAG (if MAXQ-JTAG-USB is used)
• Power supply filtering capacitors
• Extension headers for each uC pin on 0.1" row header
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions:100x80 mm (1.8x1.8")
• Prototype area with GND and 3.3V bus
• Power jack connector for AC/DC power supply