Level Shifter convertidor de niveles 4 canales BSS138


 

$160.50

193 puntos
8 puntos
LSIC0204-GK_23-0
13 Artículo(s)
+
  • DESCRIPTION

    Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

    We do have some other handy level shifters in the shop, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.

    This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.

    While we designed it for use with I2C, this works great for SPI, TTL Serial, and any other digital interface both uni-directional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.

  • TECHNICAL DETAILS

  • LEARN

    Light Meter
    Measure and display light levels.
    Setting up IO Python Library on BeagleBone Black
    Using GPIO, PWM and more with Python!

Nuestros clientes también compraron

 
GPS

Antena GPS

  $172.00
   
Antena IPX a SMA

Antena IPX a SMA

  $18.00
No hay :(
   
Pro Mini

Arduino Pro Mini Compatible 2 5V 16Mhz

  $266.50
 
 
Bateria LiPo

Bateria LiPo 2S 7.4V 2200 mAh 20C Zippy

  $400.00
   
Bateria LiPo

Bateria LiPo 3.7V 1200mA nano-tech 1S 15C

  $232.50
   
LIPO-SAFE

Bolsa protectora LIPO-SAFE para Baterías LiPo Litio 18x22cm

  $205.00
 
 
Buzzer

Buzzer 13mm 9 Khz

  $4.00
No hay :(
   
jumper

Cables jumper hembra-hembra 40 unidades

$78.00   $53.00
No hay :(
   
macho-hembra

Cables jumper macho-hembra 40 unidades

$78.00   $50.00
No hay :(
 
 
Arduino

Caja para Arduino UNO R3 HeTpro R2

  $163.50
No hay :(
   
HOBBYKING

Cargador de Baterias LiPo 2S/3S/4S HobbyKing DC-4S

  $513.00
   
lipo

Cargador de baterias lipo USB-uLiPo

  $181.50
 
 
LM339N

Comparador LM339N

  $26.50
   
Arduino UNO

DCduino SMT (Arduino UNO R3 R2 compatible)

  $229.50
No hay :(
   
Eliminador 12V

Eliminador 12V 2A jack 2.1mm

  $105.00
No hay :(